Print Page - removing igbt and bridging for TTL

Title: removing igbt and bridging for TTL
Post by: njorge0319 on January 03, 2013, 03:50:45 AM

i need to remove my igbts for ch0,1,2,and3
heres a pic of the bottom of the board i found,
i need to remove the IGBT chip and replace it with a bridge between the center pin and the output pin to make it TTL/active coil compatible.
soo which fets do i remove and what pins should i bridge? what do i bridge them with?

(http://www.vems.hu/files/genboardv3/images/v3.2/v3.2_bottom_components.jpg)

Title: Re: removing igbt and bridging for TTL
Post by: GintsK on January 03, 2013, 08:30:26 AM

:)

http://www.vems.hu/files/GergelyLezsak/v35pics/15_FETS.jpg

VEMS Community Forum

Technical => Ignition => Topic started by: njorge0319 on January 03, 2013, 03:50:45 AM