I have question about powering up LED when my oil pressure drops below some value. When engine is off (oil pressure=0bar adc raw value channel 5 is 0.5 volts). So when i have set values like in picture i should not have contact to ground, but i have. What am i doing wrong, please help.
(http://img18.imageshack.us/img18/6349/captureja.jpg)
What value do you want it to be?
try 6 inverted.
Minimum rpm/kpa window is off!
Ok, now i am completely confused. All i want to light up LED when adc raw value drops below some value, i don't care about coolant temp, CE light or anything else. How should my settings look like ?
Start off by doing what Gints said, put 0 for both rpm and kPa.
Press F1 for help in the dialog, with any kind of reasoning ability you should be able to figure this out.