Hi all,
Tried to upload some firmware this evening and used the FW update wizard through the 2011-15-11 version of VT. chose the latest option of 1.2.0
it was running through everything fine until it got to "config upload and verify" and it froze and gave message that "firmware is too old try upgrading to newer firmware or for vems round try the revival tool"
If I go into preferences and press detect ECU it say device connected on COM9 but as soon as I close that window the device tries to connect and says initializing...then checking passwords... then gets to fetching firmware and it then says in the bottom right corner pop up message of "device disonnected" does this three times over before timeout gives the message "firmware is too old try upgrading to newer firmware or for vems round try the revival tool"
What can i do to bring her back. Don't want to go hard resetting stuff before I ask if I may do more damage than good. :-\
Thanks in advance guys.
You must use the very latest Vemstune
http://www.vems.hu/download/VemsTune/NIGHTLY/VemsTune-Install-2012-05-23.exe
Working...thanks!
I have just posted quite the same issue before reading this post, but in my case I have uploaded 1.2.0 using the latest VT 2012-05-23 and there no newest to solve the case!!