Text only | Text with Images

VEMS Community Forum

VEMS => Configuration => Topic started by: Senchiro on April 26, 2012, 04:57:03 PM

Title: 50kpa on idle
Post by: Senchiro on April 26, 2012, 04:57:03 PM
Hello.I have a m20b20 engine with a charger.What can i do to make good kpa? 50 is to many(( 800rpm, 20deg on idle.If without charger, it is 46kpa.
Title: Re: 50kpa on idle
Post by: GintsK on April 26, 2012, 08:22:33 PM
What is wrong with 50Kpa?  ???
Title: Re: 50kpa on idle
Post by: Senchiro on April 27, 2012, 04:40:47 AM
It is not normal pressure on idle i think? normal is near 28-30kpa?
Title: Re: 50kpa on idle
Post by: GintsK on April 27, 2012, 06:11:18 AM
It depends from cam. Narrow cams with zero overlap gives lowest absolute pressure. With overlap increase pressure rises. In some cases it can be in 90...100kpa range.

Gints
Title: Re: 50kpa on idle
Post by: Senchiro on April 27, 2012, 07:47:18 AM
cam is stock )) may it be from changed  degree of compression? it was 9.4, now is 8.0
Title: Re: 50kpa on idle
Post by: Jamo on April 27, 2012, 10:13:16 AM
I would say that is normal pressure
Title: Re: 50kpa on idle
Post by: mattias on April 27, 2012, 05:02:14 PM
50 is perfectly normal for a stock M20. It will loose some from the lower c/r.
Text only | Text with Images