Hi All.
Im about to make my own car ready with vems, and need a 3rd vr input ,
so i have crank , second and third vr sensor input,
So i have purchased the VR-Hall converter from the vems shop, as this is what i need says Marcell,
But the problem is to hook it up, it looks like it can only divide the signal with 4 or 8 on the output,
but this is ofcourse no good when using it for camsensors
can someone help me?
http://img.photobucket.com/albums/v41/Denmark/43ebd068.jpg
Thanks,
Skassa
Email them, You can change it to non divided.
mailed and written on the wikipage,
So hope to get a reply :)
well on with other jobs then,
Thanks,
Skassa