Print Page - Good source for Econoseal female pins?

Title: Good source for Econoseal female pins?
Post by: wazzu70 on April 16, 2012, 03:07:54 AM

I need some additional parts for my harness and I am running low on these connectors. Where is the best source for the ones that are the same as what comes with the 36 and 18 pin connectors for the main board?

I looked at TYCO and there are quite a few variations so I wanted to see if someone could point me in the right direction.

Thanks.

Title: Re: Good source for Econoseal female pins?
Post by: gunni on April 16, 2012, 01:31:27 PM

http://www.vems.hu/wiki/index.php?page=EconoSealIII

Title: Re: Good source for Econoseal female pins?
Post by: wazzu70 on April 17, 2012, 05:37:02 AM

Thanks, for whatever reason searching the TYCO page on my phone did not return any results. When I did it at home I was able to find what I needed.

For future reference

Pins: AMP 345150-1
Seal: AMP 347874-1

The listing on the VEMS page linked did not work with the 0-0 in front of the numbers listed.

I was able to get both parts from http://www.masterdistributors.com

Title: Re: Good source for Econoseal female pins?
Post by: Sprocket on April 19, 2012, 07:44:21 PM

http://www.polevolt.co.uk/acatalog/Econoseal_Connectors.html

Title: Re: Good source for Econoseal female pins?
Post by: Joof on March 11, 2013, 02:13:51 PM

Anyone use the VEMS Shop external map sensor?

I am re-doing a harness and these female connectors are different than the ECU side. They look the same from the front (female part) but the latching mechanism is different. Any ideas on a part number for these?

Thanks.

VEMS Community Forum

Technical => Wiring & Sensors => Topic started by: wazzu70 on April 16, 2012, 03:07:54 AM