Print Page - siemens 870cc settings

Title: siemens 870cc settings
Post by: darzamat on March 22, 2012, 08:22:47 PM

hey guys,
i'm new around here and using vems newly and i need siemens 870cc injector settings to set them up..you guys would know the specifications of 870s i guess but let me write down what i have found about them anyway.my car is golf gti (AGU) 1.8T..using 1.0.80 firmware by the way

Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)
Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 60 lb/hr = 630 cc/min = 453 g/min
Static Flow Rate @ 87PSI ( 600kPa ) w/Gas: 85.7 lb/hr = 900 cc/min = 648 g/min
Gain: 0.11ms/mg
Offset: 0.055ms
Turn on time @ 14VDC: 1.14ms
Turn off time: 0.85ms @ 600KPa
Series: DEKA 4 ( DEKA IV )
Orifice Type: Multi-orifice
Spray Pattern: 30 Degree Spray Cone
Factory fitted with Viton upper and lower o-rings

(http://img828.imageshack.us/img828/8650/img0490xv.jpg) (http://imageshack.us/photo/my-images/828/img0490xv.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

thank you

Title: Re: siemens 870cc settings
Post by: darzamat on March 26, 2012, 05:04:07 PM

anyone ?? ???

Title: Re: siemens 870cc settings
Post by: MWfire on March 31, 2012, 08:19:51 PM

352us
408us
4080us
800us
100%
25.5ms

Title: Re: siemens 870cc settings
Post by: darzamat on April 02, 2012, 08:42:27 PM

let me try these settings
thank you very much man

VEMS Community Forum

Technical => Fuel Injection => Topic started by: darzamat on March 22, 2012, 08:22:47 PM