Print Page - Changing ignition system

Title: Changing ignition system
Post by: reevio on December 31, 2011, 06:17:09 PM

Right I'm changing my ignition system back from a coil pack with wasted spark back to the standard coil and dizzy setup what do I need to change software wise via vems tune as il be changing the wiring slightly

Title: Re: Changing ignition system
Post by: andreNL on December 31, 2011, 10:50:41 PM

Connect one wire to the coil and set all ignition table settings to use that singels gate. Isolate the other wires carefully

Title: Re: Changing ignition system
Post by: reevio on January 01, 2012, 01:51:09 AM

Thanks il give that a go

Title: Re: Changing ignition system
Post by: reevio on January 03, 2012, 10:14:16 PM

Right I've literally changed the wiring using 12+v and way 35 on the ec36 changed the software on vems tune to run 1 channel using that port is this correct as can't test yet as waiting on a new set of ignition leads

Title: Re: Changing ignition system
Post by: andreNL on January 05, 2012, 08:13:01 AM

yes perfect ;D

Title: Re: Changing ignition system
Post by: reevio on January 05, 2012, 08:29:39 AM

Cheers bud just waiting on new coil now

VEMS Community Forum

Technical => Ignition => Topic started by: reevio on December 31, 2011, 06:17:09 PM