Text only | Text with Images

VEMS Community Forum

General Category => General Discussion => Topic started by: MWfire on December 16, 2011, 09:44:40 PM

Title: reprofiling camshafts
Post by: MWfire on December 16, 2011, 09:44:40 PM
Do you know good shop which reprofil camshaft in Europe?
Title: Re: reprofiling camshafts
Post by: Kamuto on December 18, 2011, 12:38:16 PM
Quote from: MWfire on December 16, 2011, 09:44:40 PM
Do you know good shop which reprofil camshaft in Europe?
these can do it http://www.dbilas-shop.com/Products/Performance-camshafts:::7_2504.html
Title: Re: reprofiling camshafts
Post by: MWfire on December 18, 2011, 12:40:47 PM
but they cams have lover lift then stock. opel 2.0 16v
And they are very expensive.
Title: Re: reprofiling camshafts
Post by: GintsK on December 18, 2011, 05:06:10 PM
Try to ask Piper Cams. They did it for us in the past.
Title: Re: reprofiling camshafts
Post by: [email protected] on December 18, 2011, 08:55:41 PM
I've never used them, but they've been around for quite some time:
http://www.autosprint.co.uk/?p=p_27
Title: Re: reprofiling camshafts
Post by: MWfire on December 18, 2011, 10:59:30 PM
tnx a lot for info.
Any experiences with reprofiled cams? Wearing?
Title: Re: reprofiling camshafts
Post by: andreNL on December 19, 2011, 03:29:52 PM
Kent cams
Title: Re: reprofiling camshafts
Post by: Sprocket on December 29, 2011, 08:33:22 PM
Newman Cams

http://www.newman-cams.com/

Good reading and advice in their cam selection document, especially about cam and follower material compatability, and wear/ durability http://www.newman-cams.com/pdf/camshaftselection.pdf
Text only | Text with Images