Print Page - Secondary trigger HALL to vems, how?

Title: Secondary trigger HALL to vems, how?
Post by: lost on August 14, 2011, 12:01:50 PM

(http://img594.imageshack.us/img594/3455/halldejo.png) (http://imageshack.us/photo/my-images/594/halldejo.png/)

Is this right?
Just wire it directly to vems v3.5

EC36 pin28 +5v to RED wire on hall sensor
EC36 pin26 GROUND to BLACK wire on hall sensor
EC36 pin13 hall signal to WHITE wire on hall senor

How to check on genboard that secondary hall is enabled?

Title: Re: Secondary trigger HALL to vems, how?
Post by: Erikk on August 14, 2011, 02:59:39 PM

Yes.

If secondary trigger is enabled and no signal is detected you wont get any RPM readings.

VEMS Community Forum

Technical => Triggering => Topic started by: lost on August 14, 2011, 12:01:50 PM