Text only | Text with Images

VEMS Community Forum

Technical => Wideband & EGT Gauge => Topic started by: Tony C on June 19, 2011, 09:54:18 PM

Title: using VEMS to trigger a narrow band gauge
Post by: Tony C on June 19, 2011, 09:54:18 PM
Hi all,
long time no speak :-)
i have a autometer Phantom narrow band gauge, can i use the vems thats running wideband to give a narrowband signal to run the gauge?
Title: Re: using VEMS to trigger a narrow band gauge
Post by: boostd audi on June 20, 2011, 03:37:31 AM
most narrow band are 0-1v.. wideband is 0-5v..

Title: Re: using VEMS to trigger a narrow band gauge
Post by: Tony C on June 20, 2011, 08:16:44 PM
so theres no way the vems can trigger the gauge then?
Title: Re: using VEMS to trigger a narrow band gauge
Post by: mattias on June 20, 2011, 08:52:15 PM
There's currently no output for that function. You can just get any AIM-compatible gauge (like the VEMS round) and display the value.
Title: Re: using VEMS to trigger a narrow band gauge
Post by: Ignitec on June 20, 2011, 11:35:15 PM
or you can mount extra narowband and use it only for that purpose
Title: Re: using VEMS to trigger a narrow band gauge
Post by: [email protected] on June 21, 2011, 08:32:27 AM
A narrow band will give no useable information, only that its too rich or too lean.
Title: Re: using VEMS to trigger a narrow band gauge
Post by: Tony C on June 22, 2011, 06:05:41 PM
that was what we were after Rob,
a visual aid while racing regarding the colour bands etc,
Title: Re: using VEMS to trigger a narrow band gauge
Post by: mattias on June 22, 2011, 11:41:22 PM
The warning light function can be used to alert you if you're running leaner than x.xx lambda, that's more then enough information to look at while racing.
Text only | Text with Images