Print Page - ADC channel 5

Title: ADC channel 5
Post by: Seight-v8 on April 30, 2011, 08:31:59 PM

hello all,

I cannot get ADC channel 5 in vemstune to register any readings, i know its getting 0.53v, but the vemstune gauge just shows n/a all the time.

either the rawADC of calADC shows n/a or zero all the time....

Do i have to enable anything or do something else to make it work?

thanks

scott

Title: Re: ADC channel 5
Post by: z0tya on May 02, 2011, 08:04:38 AM

with 1.1.87 and 88 you may need switch real time data option to adc/individual power at knock sampling settings

VEMS Community Forum

Technical => Wiring & Sensors => Topic started by: Seight-v8 on April 30, 2011, 08:31:59 PM