Hi,
Try to start the engine but it run on 2 cylinders only.First i've try by the Ec 18 steppers output,then with the Ignition Ec36 output,swap the ignition order firing and nothing works and the exhaust smell fuel.
Ps :output drive a N122 Bosch igntion module,Vems config ignition 4+4.
The coils checked,injectors too and the engine run fine with my Bosch Oem ecu.
help,help.... ???
May be post your config file?
Hi,
The engine start and idle on his four cylinders,the solution?
I've pull off the ignition amplifier module and drive the coil directly from the igbt output (Ec36).
It works,now I have to tune all my fuel,ignition,lambda,enrichment tables....