I think i request for a 5 cylinder 10 injector outputs for staging function but the vems have 8 Injector outputs.
what can i do?
Hello !
At first : My english is not "so good" , i'm sorry for that !
I've seen in the manual a picture how to wire 8 injectors. Below that is a picture called "And to pair injectors in parallel" !
Please look here : http://www.vems.hu/wiki/index.php?page=MembersPage%2FPhatBob%2FUserGuide
May be it works when you wire two injektors on one exit of the ECU, but i think they must have high impedance ...
I cant promise you but its the way i see ;)
Best regards Martin from germany
Hello,
i have speak with Marcell and he give me the solution
THX.
And what was the solution?
In VemsTune, press F1 in the "injector staging" dialog.
With 5 primary injectors, you have 2 secondary injectors directly following the first 5 in the injector output table.
So you'd need to put up to two larger injectors further out in the inlet then?
Yes, or put it another way: You have two outputs to drive however many injectors you need further upstream from the head.
Example :With 5 extra staged injectors wired 3 and 2 in parallell on the two staged outputs.