Does anyhow know if the vems can integrate with the Audi s2 for the speed sensor input?
If so any connection details?
Audi is usually a reed switch input.
Do you have the VEMS Motronic PnP ecu? Or did you wire in a standard v3?
Mine is a wired in V3 with a loom adapter
Quote from: Jamo on September 14, 2010, 05:32:27 PM
Mine is a wired in V3 with a loom adapter
Check your configuration paper you got with your ECU or send a mail to Hungary and see if you have wheelspeed input in it.
It´s almost standard nowadays so if its a quite new ecu you should have it.
that's not the information I'm after in this request, where do you get the wheel speed input from on the S2?
Quote from: Jamo on September 14, 2010, 07:46:36 PM
that's not the information I'm after in this request, where do you get the wheel speed input from on the S2?
Sorry for the misunderstanding. It´s motronic pin 50 if its a ABY, AAN or ADU.
Ah o.k so your confirming pin 50 vss and this is compatible with the speed sensor in vems? ;D
http://www.s2central.net/motronic_pinout_ABY.html
Anyone know the configuration of the speed sensor in VEMS to match the VSS input
Quote from: Jamo on September 14, 2010, 08:04:03 PM
Ah o.k so your confirming pin 50 vss and this is compatible with the speed sensor in vems? ;D
http://www.s2central.net/motronic_pinout_ABY.html
Anyone know the configuration of the speed sensor in VEMS to match the VSS input
http://www.vems.hu/wiki/index.php?page=MembersPage/MarcellGal/PowerAndTraction/SpeedoMeter (http://www.vems.hu/wiki/index.php?page=MembersPage/MarcellGal/PowerAndTraction/SpeedoMeter)
Thats a 3B though, but it´s probably same same..
Excellent I have ammunition to go to my supplier now to help sort it out, great stuff