Text only | Text with Images

VEMS Community Forum

VEMS => Configuration => Topic started by: krzycho-g on August 12, 2010, 02:24:09 AM

Title: Flyback option and 30V TS diode and IAC flyback
Post by: krzycho-g on August 12, 2010, 02:24:09 AM
Hello

I have High-Z injectors and mounted High-Z Flyback (SMB + 20V) . recently installed recommended 30V TS diode between flyback pad and +12V BAT.
Did not I should change 20V diode on 6.8V or SMB ?
I do not want to burn FET...

And second question - Can I connect the flyback diodes which safeguard the FET drives IAC (BOSCH duecoil) to the flyback pads which now is connected to +12V through 30V TS diode.

Thanks for answer

Kris
Title: Re: Flyback option and 30V TS diode and IAC flyback
Post by: MWfire on August 12, 2010, 04:45:18 AM
iac, boost solenoid .. need normal diode(0.7voltage drop). So for every iac,boost solenoid... you need one diode.
Title: Re: Flyback option and 30V TS diode and IAC flyback
Post by: krzycho-g on August 12, 2010, 05:59:48 AM
OK , i can connect this diode to flyback pad before 30V TS diode, do I have connect to +12V BAT ?
Title: Re: Flyback option and 30V TS diode and IAC flyback
Post by: GintsK on August 12, 2010, 03:19:21 PM
Why boost (or any other solenois except IAC) needs diode? Normal diode gives smooth, slow closing. Do we need it for BC?
Text only | Text with Images