VEMS Community Forum

VEMS => Calibration & Mapping => Topic started by: Denmark on June 30, 2010, 09:03:00 AM

Title: Heat soak
Post by: Denmark on June 30, 2010, 09:03:00 AM
Hi All.

I have a problem when starting the engine after it have been runing normally, and you turn of the car for aprox 15min,

then the idle will be all over the place for 30sec, jumping up and down.

in the older megatune, it would be okay, when just upping the fake air scale.

Any suggestens to try to correct this?

/Skassa
Title: Re: Heat soak
Post by: z0tya on June 30, 2010, 09:43:22 AM
mat/tps enrichment table if you use 1.1.7x fw