Text only | Text with Images

VEMS Community Forum

Technical => Wideband & EGT Gauge => Topic started by: ratty on June 17, 2010, 12:00:14 PM

Title: Default EGT settings
Post by: ratty on June 17, 2010, 12:00:14 PM
What is the defaults as mine went awol after flashing the gauge?

From memory its 71 and 389, just wish I written them down before starting now ;D
Title: Re: Default EGT settings
Post by: mattias on June 17, 2010, 06:43:59 PM
71 most likely.

Or,  email [email protected] with your ECU serial number and ask for your calibration data.
Or, calibrate your self.
Title: Re: Default EGT settings
Post by: ratty on July 14, 2010, 01:07:37 PM
Sorry its been a while, theres no marking etc on the unit and I can't find the serial number in the code, is there a details set of instructions on calibrating the unit somewhere?
Title: Re: Default EGT settings
Post by: gunni on July 14, 2010, 04:37:23 PM
Open the unit it´s marked on the inside.
Title: Re: Default EGT settings
Post by: BigD on July 20, 2010, 05:44:20 PM
Shouldn't this value be calibrated manually? Mine read too high (clt and mat were mid 20s, egt showed over 30 - stone cold engine). I tried calibrating in free air and my value ended up being 92... (EDIT: sorry I just realized this is the gauge forum but I assume this applies for VEMS as well)
Text only | Text with Images