Hi there
I´m facing some problems with my current setup. The display for EGT is jumping from 0 to 30 in milli seconds and going back to zero.
There is no EGT mounted in the car.
Any ideas to fix or any cause for this behavior?
Thanks for reply
Olli
Right click and change gauge data to something you'd prefer to see? Or click "View Mode" at the top to go into Edit Mode and delete it entirely?
Find the reason for the behavior
The IAC setup was wrong and causing the issue
http://www.vemssupport.com/forum/index.php/topic,13004.0.html (http://www.vemssupport.com/forum/index.php/topic,13004.0.html)
Olli