Print Page - inverted - assign outputs

Title: inverted - assign outputs
Post by: Seight-v8 on April 29, 2010, 01:01:46 AM

hello all,

been struggling for a while getting V1.1.70 to work my fuelpump on channel 5.

But today i accidentally clicked on the "inverted" tick box in assign outputs tab by mistake, but to my suprise my fuel pump sprang in to life....

i am sure in V1.1.64 config, it was not inverted...

But question is....what is the meaning of the inverted box, and is it gonna do any harm????

cheers

scott

Title: Re: inverted - assign outputs
Post by: [email protected] on April 29, 2010, 04:46:14 AM

It means that the channel is on, when it used to be off
and off when it used to be on.

Title: Re: inverted - assign outputs
Post by: Seight-v8 on April 30, 2010, 01:32:51 AM

thanks rob,

Makes a bit more sense now...and it works at last....

This might also help with my tacho signal not working....will try that next.

scott

VEMS Community Forum

VEMS => Configuration => Topic started by: Seight-v8 on April 29, 2010, 01:01:46 AM