Print Page - Basic Loom Qs (12v source)

Title: Basic Loom Qs (12v source)
Post by: Tom on February 24, 2010, 12:31:46 AM

I'm currently putting my VEMS loom together, just wanted to check my plans were ok:
Rather than use the standard 12v switched supply for everything, I'm thinking about putting a relay in to control a fresh 12v line which I'll use for the VEMS and all sensors / injectors etc...
Are there any parts that I should be supplying with a permanent 12v rather than the switched?

Title: Re: Basic Loom Qs (12v source)
Post by: [email protected] on February 24, 2010, 02:45:14 AM

I can see nothing that needs a constant feed apart from a single main relay, you could do worse than copy how the VEMS harness has things setup:
(http://www.vems.co.uk/VEMSSchematics/Nissan/VEMSV3LoomRelays.png)

Title: Re: Basic Loom Qs (12v source)
Post by: Tom on February 24, 2010, 03:43:42 AM

Very useful. Thanks for that Rob.

VEMS Community Forum

Technical => Wiring & Sensors => Topic started by: Tom on February 24, 2010, 12:31:46 AM