Print Page - lcd with serial interface

Title: lcd with serial interface
Post by: Seight-v8 on January 02, 2010, 07:49:19 PM

hello all,

Can a LCD screen with a serial (IASI-2-LCD Module) interface be used with the vems ecu.

The serial connection only has 5 pins

GND
RX(i
5V
TX
RX

Or will i need to wire it as per the instructions in the manual.

cheers

sott

Title: Re: lcd with serial interface
Post by: jrussell on January 02, 2010, 08:37:02 PM

The LCD interface is for parallel LCD screens and will not work with serial screens.

Title: Re: lcd with serial interface
Post by: Seight-v8 on January 02, 2010, 09:27:45 PM

cheers

its no problem will just de-solder it from the LCD screen, as it came this way.

and connect it up as per the VEMS instructions...as its the same screen.

scott

VEMS Community Forum

Technical => Wiring & Sensors => Topic started by: Seight-v8 on January 02, 2010, 07:49:19 PM