Author Topic: Volvo T5 triggering  (Read 7802 times)

Offline liam.mccaffrey

  • Jr. Member
  • **
  • Posts: 4
  • BHP: 0
Volvo T5 triggering
« on: September 21, 2009, 07:53:58 am »
I am planning to run a supercharged T5 in a special project and would like peoples thoughts on the best way to go about triggering it.

As far as I can tell at the moment I would need to have a 60-2 primary trigger along
with a secondary cam trigger and run fully sequentially.  Is that right??

This is my first management install so I'm feeling in the dark a little.

Cheers

Liam Mc


Offline MWfire

  • Hero Member
  • *****
  • Posts: 721
  • BHP: 35
Re: Volvo T5 triggering
« Reply #1 on: September 21, 2009, 05:04:29 pm »
you can run these enegine only with 60-2 wheel, you need to spark 5 time per crank rotation(wasted spark on one cilynder with cop).
Better way is to run can with cam sync(25 option to sec trigger).
ref trigger table is 0 96 72 48 24
number of teeth 58, next 24
I don't know now what is trigger tooth and deg, but i will start engine tomorow and strobe it.

Offline liam.mccaffrey

  • Jr. Member
  • **
  • Posts: 4
  • BHP: 0
Re: Volvo T5 triggering
« Reply #2 on: September 22, 2009, 03:02:13 pm »
Thank you, I'd appreciate any guidance you could give.

Offline MWfire

  • Hero Member
  • *****
  • Posts: 721
  • BHP: 35
Re: Volvo T5 triggering
« Reply #3 on: October 09, 2009, 12:41:07 am »
today i started t5(5cyl) only on 60-2 sensor, i will upload config later.

Offline MWfire

  • Hero Member
  • *****
  • Posts: 721
  • BHP: 35

Offline liam.mccaffrey

  • Jr. Member
  • **
  • Posts: 4
  • BHP: 0
Re: Volvo T5 triggering
« Reply #5 on: October 26, 2009, 05:45:01 am »
awesome, I hope this will help come the time  :) much appreciated