Technical > Wiring & Sensors
rev counter input?
Tony C:
set waterpump channel like this?,
dnb:
You'll probably need to use a LED. Bulbs require more than the maximum 350mA from a P259 output to light...
Tony C:
ah not got any leds at the mo,
will try the water pump channel first to see if i gets 12v, if so will try the rev counter on that pin.
dnb:
They all worked when the ECU was here. I got the test box LEDs to flash using each P259 output as the tacho output in turn.
Tony C:
strange,
wonder why the rev counter wont work then,
any ideas?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version