Hello,
how do I connect to the VEMS PNP Audi S2 for a switch at the Launch Control?
I have a female connector with SSC6 on my VEMS PNP
-Pin1 mcp3208 pin6, CH5 analog input
-Pin2 mcp3208 pin7, CH6 analog input
-Pin3 mcp3208 pin8, CH7 analog input
-Pin4 EC36 pin 34 (power out)
-Pin5 EC36 pin 36 (power out)
-Pin6-GND
In the VEMS manual is only so PIN16 of EC18 to EC36 Pin28 with a resistance to the switch 2K7
Help me please