Author Topic: AIM MXG set up?  (Read 3370 times)

Offline JohnP

  • Jr. Member
  • **
  • Posts: 33
  • BHP: 0
AIM MXG set up?
« on: July 25, 2020, 06:18:12 am »
I have bee attempting to get my AIM MXG digital dash set up. I have the AIM set to allow Vems V3 datastream from my ecu. I also have it connected to RX/TX. When i enable the datastream in vems I am confused as to which else I have to configure.

I was hoping to grab some simple outputs Throttle, Coolant temps, Wideband, etc to display on the dash but seem to have nothing appearing.

I find the AIM stream settings with the AIM inputs with unique channels rather confusing. Please help me understand the protocol to follow the AIM instructions as it doesnt appear to line up for me.

https://www.aimtechnologies.com/support/racingecu/VEMS_V3_101_eng.pdf
« Last Edit: July 25, 2020, 03:27:39 pm by JohnP »

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: AIM MXG set up?
« Reply #1 on: August 04, 2020, 12:49:29 pm »
Do you have a config ?