« previous next »
Pages: [1]

Author Topic: Board v3.7 Primary Trigger converting from VR to HALL  (Read 7666 times)

Offline Darkweb

  • New Users
  • *
  • Posts: 1
  • BHP: 0
Board v3.7 Primary Trigger converting from VR to HALL
« on: June 11, 2020, 06:51:41 am »
Hi. I would like to convert my vems v 3.7 from pr trigger VR to HALL.
What i have done :
 SJ2 closed SJ6 open
R30 pullup (3,3kohm)
I did measure the voltage between SJ2 and GND with board powered without Hall sensor.
2 V only  :'( , i know its not enough.
Is there anyone who knows what to do? How to push that voltage up?
Logged
Pages: [1]
« previous next »