Author Topic: Trigger ERROR Subaru 6 7  (Read 7097 times)

Offline derill3237

  • Jr. Member
  • **
  • Posts: 10
  • BHP: 0
Trigger ERROR Subaru 6 7
« on: May 21, 2020, 10:25:35 am »

Help I can not start a Subaru with a trigger of 6 7 ...

Primary trigger error ..

Software 1.2.11 ...

Offline MWfire

  • Hero Member
  • *****
  • Posts: 721
  • BHP: 35
Re: Trigger ERROR Subaru 6 7
« Reply #1 on: May 21, 2020, 02:15:03 pm »

Help I can not start a Subaru with a trigger of 6 7 ...

Primary trigger error ..

Software 1.2.11 ...
maybe wrong polarity?

Offline derill3237

  • Jr. Member
  • **
  • Posts: 10
  • BHP: 0
Re: Trigger ERROR Subaru 6 7
« Reply #2 on: May 28, 2020, 10:44:46 am »

Help I can not start a Subaru with a trigger of 6 7 ...

Primary trigger error ..

Software 1.2.11 ...
maybe wrong polarity?

tried to change, nothing changed

Offline derill3237

  • Jr. Member
  • **
  • Posts: 10
  • BHP: 0
Re: Trigger ERROR Subaru 6 7
« Reply #3 on: May 30, 2020, 06:25:57 pm »

Help I can not start a Subaru with a trigger of 6 7 ...

Primary trigger error ..

Software 1.2.11 ...
maybe wrong polarity?

tried to change, nothing changed

Here is a link to triggerlog: http://wdfiles.ru/6xld

Offline MWfire

  • Hero Member
  • *****
  • Posts: 721
  • BHP: 35
Re: Trigger ERROR Subaru 6 7
« Reply #4 on: May 31, 2020, 11:39:55 am »

Offline derill3237

  • Jr. Member
  • **
  • Posts: 10
  • BHP: 0
Re: Trigger ERROR Subaru 6 7
« Reply #5 on: May 31, 2020, 07:07:01 pm »
Trigger log looks good.
http://www.vems.hu/wiki/index.php?page=InputTrigger%2FSubaruTrigger
Upload your config.

Thanks .. I started the car ..

The problem was the following ...

Next trigger Tooth had a value: 1
When I chose Subaru 6 7 from the list ...

Changed this value to 3 and received a working signal ... but .... Now Config sanity check weighs an error ... while everything works fine ...

If you help me figure out what’s going to be, I will be very grateful ..