« previous next »
Pages: [1]

Author Topic: Only Gauge: How Change AFR to Lambda without Software  (Read 5890 times)

Offline tds.lurker

  • Jr. Member
  • **
  • Posts: 7
  • BHP: 0
Only Gauge: How Change AFR to Lambda without Software
« on: June 23, 2020, 06:42:50 pm »
Hi @ all,

I'm usinge the VEMS Gauge only to display the EGT and O2. I'm using no software or such things.
After working on my engine i turn on my ignition and the Display show no more lambda- it switched to AFR.
So how i can switch back to Lambda mode? i press the button, nut only the slots are changing.
sorry for this stupid question...

Thx
Timur
Logged
Pages: [1]
« previous next »