« previous next »
Pages: [1]

Author Topic: FW 1.1.18 Reference tooth table RB25  (Read 6303 times)

Offline krzak

  • Jr. Member
  • **
  • Posts: 15
  • BHP: 2
FW 1.1.18 Reference tooth table RB25
« on: August 01, 2009, 02:21:45 pm »
Hello
Now I connect VEMS to RB25 and I am little confused what I must write in table Reference tooth table in 6cyl. I`ve CAS disk 24+1.
Please help me fill this table...
Thanks a lot for any advice.... :)
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: FW 1.1.18 Reference tooth table RB25
« Reply #1 on: August 01, 2009, 11:36:21 pm »
All this should be setup in the configs I sent you.
Logged

Offline dundersmurfen

  • Jr. Member
  • **
  • Posts: 32
  • BHP: 1
Re: FW 1.1.18 Reference tooth table RB25
« Reply #2 on: August 02, 2009, 01:11:29 am »
Some proven numbers would be nice... I have tried some different settings but nothing seems to make my rb26 work. Today i fired it up with 1.1.44. Now i get trigger errors, this makes sense since my problem must be related to trigger in some way. A screenshot of working primary secondary and reference tooth tables would be a good thing.
Logged
Pages: [1]
« previous next »