Author Topic: porsche 964 tpc supercharged vems ecu,  (Read 5821 times)

Offline mohamad sabehtaayon

  • Jr. Member
  • **
  • Posts: 5
  • BHP: 0
porsche 964 tpc supercharged vems ecu,
« on: December 07, 2018, 04:26:50 pm »
i ve done a nice project, i installed a tpc supercharger on my 964 1991, controlled by vems ecu,
all was going good, but suddely i realized that the mixture is too rich on idle, and that on deceleration from high rpm, the mixture is rich (10) i realized that the vaccum is not going less than -0.5 which is strange, i checked all vaccum lines there is no leak, is it possible to be fpr? does it affect the vaccum?
this problem happened suddenly!
i will be glad to hear from u guys
« Last Edit: December 07, 2018, 04:33:20 pm by mohamad sabehtaayon »

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: porsche 964 tpc supercharged vems ecu,
« Reply #1 on: December 07, 2018, 06:21:48 pm »
Hi.

Please provide a log of the occurance,
I donĀ“t know what you mean by -0.5 ,

you FPR could only affect vacuum readings if it was leaking air pressure

Offline mohamad sabehtaayon

  • Jr. Member
  • **
  • Posts: 5
  • BHP: 0
Re: porsche 964 tpc supercharged vems ecu,
« Reply #2 on: December 08, 2018, 01:06:06 am »
can i attach file here? or pls send me ur email
thx a lot

Offline mohamad sabehtaayon

  • Jr. Member
  • **
  • Posts: 5
  • BHP: 0
Re: porsche 964 tpc supercharged vems ecu,
« Reply #3 on: December 08, 2018, 10:37:42 am »
vacuum i read on Idle is 70 PSI, on deceleration minimum is 50 psi!!! i will check the FPR first easy work :)

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: porsche 964 tpc supercharged vems ecu,
« Reply #4 on: December 09, 2018, 01:28:03 pm »
Use the Vemstune sharing center to share files