News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Fried ECU

Started by passarinho, September 24, 2019, 01:43:51 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

passarinho

September 24, 2019, 01:43:51 PM Last Edit: September 24, 2019, 01:52:52 PM by passarinho
Hello. My vems died from 2 opinions.
1.opinion: Pin 12EC36 Ignition output 05 and  Ground on ignition output 07 touched together by aluminium heat sink. = black dot on heat sink bar
2.opinion: Injector A and Injector C Pin 7,8EC36 touched together by aluminium heat sink bar. = I dont see anything on it.
I got black dot on heat sink from opinion 1.
So can somebody help me to test and maybe repair board? Or it must be repaired in hungary, or I must trash my board and buy new board? Thanks for normal answers.
PS. I can't connect to Vems and after key turn, main relay is running, fuel relay dont. Engine on stock ecu runs.
Print
Go Up Pages1
User actions