Hello,
I´m struggeling a bit with this setting.
The IGN map has values around 10° advance at low rpms.
The CLT / TPS map has additional 14° advance @-10°C and 0° @60°C
This results in typical IGN advance of 22°C in idle at temps of 10°C CLT
The standard setting of Crank IGN advance is 12° advance. So I was getting no start issues at low temps.
Now i set the crank IGN advance to 20° and the engine starts nicely again.
Now the question: Wouldn´t it be better to have a dynamic setting of Crank IGN advance (at least if CLT/TPS IGN advance is configured) ?
Or is there a hidden / undocumented setting of disabling fixed crank IGN advance ? (setting it to 255 or something) ?
Thanks for your answers in advance ;-)
Marcus
