News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

V3.3 board converting to VR

Started by Timmo6, July 04, 2019, 12:55:22 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Timmo6

July 04, 2019, 12:55:22 PM
HI,
I am converting my v3.3 board from primary Hall to primary VR setup.
I am a little bit confused as in the documents someone instructs to Unsolder R30 and a bit further they instruct to solder a 18k resistor on the place of R30?
Can somebody clarify this?
Thanks
Tim
Print
Go Up Pages1
User actions