When asking for technical help at the very least let us know the version of firmware you are running.Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html
Hi,I have analog multiplex connected inside ECU (done by order during ECU build) and all seems to be working in steady state. It is switching, sometimes it is like ECU takes few sec till it start switching analogs. >> Engine stopped "noise "clearing out VIDEO >> https://youtu.be/vZWfPuv0T38However It is really strange behavior with engine running, it seems to me like lack of speed or something .. result is useless analog inputs. >> Engine running VIDEO :https://youtu.be/htHuMvQeEzEFirmware : 1.38Anybody who made it ?
Yea, I double check that. Also tried version 1.41, still the same. Last time I test it was 4 days ago.
Hmm, wasn't even aware about it . However, unchecked, config burned, nothing has changed. I checked ini files before try, it download 4 new files but nothing has changed for me. Also I tried to rollback to 1.38, still the same.Any other idea what to check ?I am considering if it takes maybe noise of the sparks or something, but it is not periodical, doing it even in idle and randomly ..