Author Topic: Analog Multiplexing issue  (Read 9461 times)

Offline Matus

  • Jr. Member
  • **
  • Posts: 72
  • BHP: 0
Analog Multiplexing issue
« on: June 12, 2019, 08:06:10 pm »
Hi,

I have analog multiplex connected inside ECU (done by order during ECU build) and all seems to be working in steady state. It is switching, sometimes it is like ECU takes few sec till it start switching analogs.  >> Engine stopped "noise "clearing out VIDEO >> https://youtu.be/vZWfPuv0T38


However It is really strange behavior with engine running, it seems to me like lack of speed or something .. result is useless analog inputs.   >> Engine running  VIDEO :https://youtu.be/htHuMvQeEzE

Firmware : 1.38

Anybody who made it ?

« Last Edit: June 12, 2019, 08:18:02 pm by Matus »

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: Analog Multiplexing issue
« Reply #1 on: June 14, 2019, 10:09:45 am »
Hi,

I have analog multiplex connected inside ECU (done by order during ECU build) and all seems to be working in steady state. It is switching, sometimes it is like ECU takes few sec till it start switching analogs.  >> Engine stopped "noise "clearing out VIDEO >> https://youtu.be/vZWfPuv0T38


However It is really strange behavior with engine running, it seems to me like lack of speed or something .. result is useless analog inputs.   >> Engine running  VIDEO :https://youtu.be/htHuMvQeEzE

Firmware : 1.38

Anybody who made it ?
updated ini files in vemstune?
Vems installer in Lithuania
valdas.sunokas@gmail.com

Offline Matus

  • Jr. Member
  • **
  • Posts: 72
  • BHP: 0
Re: Analog Multiplexing issue
« Reply #2 on: June 24, 2019, 05:43:03 pm »
Yea, I double check that. Also tried  version 1.41, still the same. Last time I test it was 4 days ago.

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: Analog Multiplexing issue
« Reply #3 on: June 24, 2019, 10:44:01 pm »
Yea, I double check that. Also tried  version 1.41, still the same. Last time I test it was 4 days ago.
btw, in vemstune preferences you have to select enable compiled files NO, :) anyway as much as I have experienced that it works all good :) more then 20 multiplexers working
Vems installer in Lithuania
valdas.sunokas@gmail.com

Offline Matus

  • Jr. Member
  • **
  • Posts: 72
  • BHP: 0
Re: Analog Multiplexing issue
« Reply #4 on: June 26, 2019, 02:43:00 pm »
Hmm, wasn't even aware about it :D

However, unchecked, config burned, nothing has changed.
I checked ini files before try, it download 4 new files but nothing has changed for me.
Also I tried to rollback to 1.38, still the same.

Any other idea what to check ?
I am considering if it takes maybe noise of the sparks or something, but it is not periodical, doing it even in idle and randomly ..
« Last Edit: June 26, 2019, 05:28:37 pm by Matus »

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: Analog Multiplexing issue
« Reply #5 on: June 26, 2019, 06:41:41 pm »
Hmm, wasn't even aware about it :D

However, unchecked, config burned, nothing has changed.
I checked ini files before try, it download 4 new files but nothing has changed for me.
Also I tried to rollback to 1.38, still the same.

Any other idea what to check ?
I am considering if it takes maybe noise of the sparks or something, but it is not periodical, doing it even in idle and randomly ..

its not noise :) never used it in way you use it :) check how these channels look  in log :)
Vems installer in Lithuania
valdas.sunokas@gmail.com

Offline Matus

  • Jr. Member
  • **
  • Posts: 72
  • BHP: 0
Re: Analog Multiplexing issue
« Reply #6 on: July 01, 2019, 07:53:05 pm »
Might it be related to SDcard logging ?  I was trying to do log, to check and share but you know.. short file that I makes seems to be weird for me.

http://www.vems.hu/files/MembersPage/Matus/MUX%20LOG.vemslog