« previous next »
Pages: [1]

Author Topic: Firmware for speed,boost per gear, display round gauge?  (Read 7930 times)

Offline lugnuts

  • Full Member
  • ***
  • Posts: 249
  • BHP: 2
Firmware for speed,boost per gear, display round gauge?
« on: December 19, 2008, 12:13:08 pm »
What is the closest firmware for the following:

Vehicle Speed Input
Boost Control per Gear
Display-only "Round" gauge Lambda/EGT (1.1.42+)
MAT Fuel Trim Table
Boost Modification for high MAT and EGT
14X16 Tables
***EDIT: Forgot SD Card Datalogging also***

I have seen some experimental firmwares for 1-2 of the above, just putting my "wishlist" out there.

Thanks,
Kevin
« Last Edit: January 22, 2009, 09:34:44 pm by lugnuts »
Logged

Offline MWfire

  • Hero Member
  • *****
  • Posts: 721
  • BHP: 35
Re: Firmware for speed,boost per gear, display round gauge?
« Reply #1 on: December 21, 2008, 09:21:16 pm »
This is 12x12 firmware
http://www.vems.hu/download/v3/firmware/v3_firmware_1.1.46_speedsensor_altknock.zip
I tryed it today and speed sensor works great.
Logged

Offline PeepPaadam

  • Sr. Member
  • ****
  • Posts: 250
  • BHP: 8
Re: Firmware for speed,boost per gear, display round gauge?
« Reply #2 on: December 22, 2008, 01:48:45 am »
Is 16x14 version of this working version also available?
Logged

Offline MWfire

  • Hero Member
  • *****
  • Posts: 721
  • BHP: 35
Re: Firmware for speed,boost per gear, display round gauge?
« Reply #3 on: December 22, 2008, 02:42:32 pm »
Take my_make
http://www.vems.hu/files/DamirMuha/1.1.46/my_make.txt
Change
MY_CONF += -D VE_SIZE_RPM=12
MY_CONF += -D VE_SIZE_KPA=12
to
MY_CONF += -D VE_SIZE_RPM=16
MY_CONF += -D VE_SIZE_KPA=14

and send this file to marcell info@vems.hu

Logged

Offline lugnuts

  • Full Member
  • ***
  • Posts: 249
  • BHP: 2
Re: Firmware for speed,boost per gear, display round gauge?
« Reply #4 on: December 23, 2008, 11:02:12 am »
edited original post, forgot wish for SD Card Datalogging also
Logged

Offline dundersmurfen

  • Jr. Member
  • **
  • Posts: 32
  • BHP: 1
Re: Firmware for speed,boost per gear, display round gauge?
« Reply #5 on: April 10, 2009, 03:34:14 pm »
just wondering... got 2 of those Display-only "Round" gauge Lambda/EGT.

seems like nice stuff, but have found no info on anything regarding them, would be nice to get them working.

firmware needed? wiring?
Logged

Offline lugnuts

  • Full Member
  • ***
  • Posts: 249
  • BHP: 2
Re: Firmware for speed,boost per gear, display round gauge?
« Reply #6 on: April 24, 2009, 09:06:22 am »
Logged
Pages: [1]
« previous next »