Alfa 2.0 V6 turbo

[[email protected]]

It's always a good idea to use an IGBT to dirve something if you have one available, they can handle big loads and are robust - the P259 is good for 350mA only.

Rob

[mattias]

The P259 doesn't handle strong solenoids well either, the flyback voltage may break it (add extra diode like 1N4007 from rescue kit).

For tacho you can use a free stepper output (S259 chip).

[lost]

Thanks

[lost]

Does anyone knows where to buy case for green lcd? like one found in vems shop?

Name of the model or something?

[lost]

[lost]

I'm owner of v3.5 so i used v3.3 drawing ... now on 3.6 i see wheel input connection.. is this internaly connected to "keyboard connector" ?

It seems like knock #2 is gone... ::)

[lost]

which megatune version is need to opet this old 2006 .msq?

[url]http://www.vems.hu/files/sly/megasquirt200507080255.msq[/url

Im intrested in trigger setting values...

[gunni]

open it in notepad and it will tell you in the first lines.

[lost]

tried, it's just garbage "#MegaTune      
   2
   "

here is part config, just  copy/paste from vems web, tryed hex to ascii but it didn't work...  ;D ???

config subpage for MembersPage/KeithHargrove/AlfaMilano .

Hello>


primep=96
primep_temp_scaling=A0
cwl=2E
cwh=0F
cranking_thres=03
awev=14
awev_temp_scaling=A0
awec=FF
warmup_clt_range[0]=00
warmup_clt_range[1]=09
warmup_clt_range[2]=1D
warmup_clt_range[3]=31
warmup_clt_range[4]=50

[gunni]

That msq file is corrupted.

[lost]

is there a way to convert values to numbers

primep=96
primep_temp_scaling=A0

96= ??
A0= ??

[lost]

basicly i just want to take a look ak  trigger settings wheel count triger tooth tdc...

http://www.vems.hu/wiki/index.php?page=MembersPage%2FKeithHargrove%2FAlfaMilano%2FConFig

[gunni]

is there a way to convert values to numbers

primep=96
primep_temp_scaling=A0

96= ??
A0= ??

It´s HEX and you can use your windows calculator.
First set it to scientific
Then select HEX
the input the value, then select DEC again and it will be converted into decimal. Or you can use google probably.

95 = 150
A0 = 160

[lost]

Thanks.

Another question.
Can i run vag active cops with igbt's or i have to remove them, (i dont have camsync)

I currently have stock dizzy, was planning to use wasted sparr 3x2 coil, but someone suggested to use cops.
(cheaper & easy to find).

For 6 active cop's without camsync 3 ignition channels are used ? same as wasted spark?

[lost]

Also it it possible to use second wbo heater FET to drive something like iac or boost control?
Or it's onley used for second wbo2?

Thx.