« previous next »
Pages: 1 [2]

Author Topic: KP61 20v Forged RMSport Pistons, TODA 264/9.1mm Cams and VEMS :D  (Read 18526 times)

Offline irishtwincam

  • Full Member
  • ***
  • Posts: 199
  • BHP: 9
Re: KP61 20v Forged RMSport Pistons, TODA 264/9.1mm Cams and VEMS :D
« Reply #15 on: June 18, 2009, 06:42:40 am »
Wiring finalised, headlights, dash, everything working 100%!
Big up to Rob for his twin coil to rpm diode diagram.

Enjoy the burble.....
http://www.youtube.com/watch?v=CqXP6cZW-z0

Logged

Offline tweek

  • Jr. Member
  • **
  • Posts: 12
  • BHP: 3
Re: KP61 20v Forged RMSport Pistons, TODA 264/9.1mm Cams and VEMS :D
« Reply #16 on: June 29, 2009, 04:05:04 am »
are ye getting the mapping done over here pete?who is doing it?are ye using a map sensor?
Logged

Offline irishtwincam

  • Full Member
  • ***
  • Posts: 199
  • BHP: 9
Re: KP61 20v Forged RMSport Pistons, TODA 264/9.1mm Cams and VEMS :D
« Reply #17 on: June 29, 2009, 05:39:54 am »
Its setup for alpha N/speed density blending, so yes map sensor being used.
Think its alpha N to 2500rpm and blended from 1500 or something like that!

I believe Dan is going to rely on the chap who mapped your car.
Havent heard from you in a bit, hows things?
Logged

Offline Jan P

  • Jr. Member
  • **
  • Posts: 12
  • BHP: 0
Re: KP61 20v Forged RMSport Pistons, TODA 264/9.1mm Cams and VEMS :D
« Reply #18 on: July 16, 2009, 04:08:59 am »
I sure like those stacks :P Where can I get those? 8)

KP + 20V -> Should be a lot of fun!
Logged

Offline irishtwincam

  • Full Member
  • ***
  • Posts: 199
  • BHP: 9
Re: KP61 20v Forged RMSport Pistons, TODA 264/9.1mm Cams and VEMS :D
« Reply #19 on: July 16, 2009, 03:14:49 pm »
Well known company called ITG, they are 120mm I think.
They have been polished and blended together.
All custom :-D
Logged

Offline irishtwincam

  • Full Member
  • ***
  • Posts: 199
  • BHP: 9
Re: KP61 20v Forged RMSport Pistons, TODA 264/9.1mm Cams and VEMS :D
« Reply #20 on: July 20, 2009, 02:21:39 am »
Logged
Pages: 1 [2]
« previous next »