News:

New Users: Send [email protected] an email with your account name. I've turned off auto-approve to reduce the 100 new spam accounts a day. Thanks, -Jason

Main Menu

Need someone to look at my log...

Started by Sanjuro, June 11, 2009, 07:13:25 AM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions

z0tya

#15
August 28, 2009, 02:05:38 PM
I think should be better use battery against to the switched supply...

Sanjuro

#16
August 30, 2009, 05:15:13 PM
Quote from: SamSpade on August 28, 2009, 11:03:33 AM
Can't really comment until we see the LM1815 input (pin 3) and output (pin 12) waveforms together, and on a shorter time base like 50us/div.

Hopefully I can get that setup by the end of next week, then we can see what happens.

Quote from: z0tya on August 28, 2009, 02:05:38 PM
I think should be better use battery against to the switched supply...

The output on these looked decent on the scope, but I'll see if I can track down a spare car battery.
Nissan S13 + VQ30DE Project
Hoping for 60-2 Crank + 1 Cam trigger for COP

dundersmurfen

#17
September 19, 2009, 05:12:13 AM
"Coil pack ground separately to chassis"

that sounds odd explain more please

wich ground wire from what coilpack etc

Sanjuro

#18
October 17, 2009, 12:49:44 AM
Quote from: dundersmurfen on September 19, 2009, 05:12:13 AM
"Coil pack ground separately to chassis"

that sounds odd explain more please

wich ground wire from what coilpack etc

I simply ran the aggregate of the coil pack ground wires to a ground point on the chassis. 

Still need to track down a deep scan oscilloscope to see what is wrong with the trigger issue. 
Nissan S13 + VQ30DE Project
Hoping for 60-2 Crank + 1 Cam trigger for COP
Print
Go Up Pages 1 2
User actions