News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Deadly high egt

Started by z0tya, March 30, 2009, 07:41:55 PM

Previous topic - Next topic

z0tya

Hello!

I have a log with a supercharged (centrifugal) v8 bmw. With 0.6 bar boost, and with intercooler.   The egt sensor somewhere in the collector, but I read over 900 celsius egt, the top is 999.
On idle it shows normal 200-250 celsius, but after it rising rapidly above 850.

Is it possible normal on this engine ? Or something wrong .

Thx

[email protected]

Is this the one with the trigger setup as described in your other post?
How have you mapped the engine?  You may be running too much ignition retard - this can cause high EGT.

z0tya

Yes, this is the same engine, but not my programming. it is car of my mate, and he is not satisfied the result. The car got a supercharger set with chip and injectors. But leaned out above 6000 rpm. So he went to vems. He said the car not better.

z0tya

There is some problem with MAT sensor too. It shows between 55 and 65 celsius.
when we displugged showed -40 so i think sensor error.
I think vems retard the ignition because of this. result high egt.