News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Please help a noob, "Trigger Error"

Started by laine_16v, March 14, 2009, 05:34:12 PM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions

laine_16v

#15
March 16, 2009, 08:26:28 PM
Its a 2 wire sensor, swapping the wires is about the only thing i havent done. I havent done that because it ran in way it currently, but i will try it anyway tonight. If the wires were the wrong way around would you get the symptoms i am experiencing?

[email protected]

#16
March 17, 2009, 01:37:21 AM
It has been known to be the cause of strangeness.

Sprocket

#17
March 17, 2009, 04:51:46 PM
Does VEMSTune have a scope for the crank trigger similar to the likes of DTA? That would be a useful tool :)

gunni

#18
March 17, 2009, 09:43:18 PM
Quote from: Sprocket on March 17, 2009, 04:51:46 PM
Does VEMSTune have a scope for the crank trigger similar to the likes of DTA? That would be a useful tool :)

I vote whole heartedly for this tool to be brought to Vems.

laine_16v

#19
March 26, 2009, 09:28:00 PM
Completely rewired it all now, and get a consistent perfect crank signal now :)

[email protected]

#20
March 26, 2009, 11:52:57 PM
Result, and some Karma points for getting that done sir.
Print
Go Up Pages 1 2
User actions