Fiat tipo 16v turbo

[ermin]

hello people. I am from croatia. i just bought a fiat tipo with engine from lancia thema 2.0 16v. turbo is replaced with garrett t3 trim 60, IC is biggier and injectors are from audi 2.2 , 20v turbo and FPR from delta!!
There are more modifiocation like ford Edis ignition, electronic boost control and BOV...

it is managed on vems but here there are little people in croatia that can adjust vems.

i have lots of problem,i have 2 maps,one on 0.8 bar and second on 1.6bar boost! on second map in full throtlle i get peak and a small explosion under hood. the turbo hole is very big and on cold he is running bad.

some pics:

http://s305.photobucket.com/albums/nn214/ermin1/tipo/?start=20

i dont know how to solve my problem with vems...

[gunni]

Hello.

Who tuned your car? That person is to blame for your problems.

What is a turbo hole?
What is peak?

[rob@vems.co.uk]

Well the first thing is to use the datalogging feature in MegaTune - then with MegaLogViewer it will be possible to see the events that lead to this event that sounds like a backfire.

Rob

[ermin]

i have the software and laptop but everiting for me is strange.hmm peak is that turbo goes to 1.8 bar and than in half second he does bomm and pressure drops to near 0.9 bar and sudenly goes up again. and turbo hole, hmmm when i press a gas than first he works in vacuum and when the turbo should start pumping i get like loss of power or something than a full throtlle and power... how do i get that log,and what sholud i do with that log??

the guy that worked my vems is stranger to me and i dont have tel number or nothing!

[rob@vems.co.uk]

Using MegaTune to make a Datalog
File->Datalogging->Record...
Use the MegaTune Datalog file dialog window to choose where to put the file (I use the desktop) I say this because its hard to work out where MegaTune saves the datalog!
Once you press the Save button it will start logging.

Do your test, then stop the datalogging with File->Datalogging->Off

And if you then save your MSQ file File->Save As... you can use the MegaLogViewer
http://www.ideasandsolutions.biz/MegaLogViewer/ with your datalog and MSQ and
replay what happened with the sensors.

[MWfire]

Hi, where are you from(town)? You can call me,0958251690.

[ermin]

i am from zadar....what town are you?? i will call you so if u are near it vill be very good!!

[MWfire]

Cakovec, but Tonci is near you.

[ermin]

moremo i na hrvatski hehe... ugl ja sam zvao Dragu koji je radio auto, i njemu je tonci mapira auto samo sto valjda nije stiga sve do kraja!!drago je reka da ce nazvati toncija ali evo proslo vec tjedan dana a ne javlja se...imas broj od toncija i ako imas informaciju koliko bi trajalo mapiranje??

[MWfire]

Imam broj, 0989380310 ili 0913776223
BTW mores mi poslati config na mail da vidim sto zeza damir.muha@fer.hr

[ermin]

hvala na broju...evo danas cu raditi onaj log pa cu ti poslati...jel treba se samo voziti ili neke vratolomije raditi?

[MWfire]

samo vozis. Ali nemoj samo log poslati, moras i config izvaditi(znaci megatune, file, save).

[ermin]

ok,to danas napravim i saljem ti!!!nazvati cu te ako bude problema!!hvala jos jednom!!

[rob@vems.co.uk]

I hope you two are able to sort something out, I forgot that Tonci was over your way, I've not heard of him in quite a while.

[MWfire]

I hope you two are able to sort something out, I forgot that Tonci was over your way, I've not heard of him in quite a while.

Lasy year he maped alfa 145 2.0t 4x4 with gt35r 0.86, best time was 10.3s on 402m.