Author Topic: VEMS'ed 200 with problems  (Read 19282 times)

Offline lugnuts

  • Full Member
  • ***
  • Posts: 249
  • BHP: 2
Re: VEMS'ed 200 with problems
« Reply #15 on: February 08, 2009, 12:07:12 am »
Yes, it is posted above, but here is the Wiki page. All of the new information is at the top:

http://www.vems.hu/wiki/index.php?page=MembersPage%2FKevinBlack%2FAudi

Offline loxxrider

  • Jr. Member
  • **
  • Posts: 16
  • BHP: 1
Re: VEMS'ed 200 with problems
« Reply #16 on: February 08, 2009, 10:42:08 am »
WOOOOOOOOOOOOOOOOO!!!!!!!!!

I just drove the car for like 20 minutes with no problems. It was the shift cut. I had to disable it. It wasn't hooked up to anything so I dont know what was causing it to activate, but that was definitely it!

Offline lugnuts

  • Full Member
  • ***
  • Posts: 249
  • BHP: 2
Re: VEMS'ed 200 with problems
« Reply #17 on: February 08, 2009, 12:49:13 pm »
about time something went right lol.

Offline Bat

  • Full Member
  • ***
  • Posts: 169
  • BHP: 8
    • Trucking site
Re: VEMS'ed 200 with problems
« Reply #18 on: February 08, 2009, 04:10:17 pm »
Hi,
If the input is not connected to anything it will pick up interference and activate. This is why it's always important to check unused options are disabled, particularly after a firmware upgrade.
Cheers,
Gavin :)
VEMs Authorised Installer / Re-seller. K head kits for A series now available!

WB/EGT gauges. Click here for customers write-up 

Visit www.doyouneedabrain.co.uk

Offline loxxrider

  • Jr. Member
  • **
  • Posts: 16
  • BHP: 1
Re: VEMS'ed 200 with problems
« Reply #19 on: February 20, 2009, 01:43:47 am »
In hopes of a possibly quicker answer, here is a link to the wiki for this car. I have an opportunity to really nail out the tuning of this car on saturday and I'd hate to miss it because of this stupid temp sensor issue. If anyone can help I would really, really appreciate it. (see first and second sections of this page)

http://www.vems.hu/wiki/index.php?page=MembersPage%2FKevinBlack%2FAudi