Small update, the car still has the problem, even with the new Cam Sync settings.
I'll describe the problem(s), I think there is 2 different issues.
1) The car drives ok at low load and up to 3500 ish RPM.
If you give it more load, even at lower RPM, the engine starts breaking up/hesitating.
I'm waiting on new datalogs and a config dump. The Oct-20 VEMSTune is not giving him a config dump so I recommended he try the Sept-08 version that i use.
2) There is a communitaction problem. Every few seconds or more - the "Resets" counter goes up and up, you can watch it count up, the gauges in MT flutter. You can see the light on the USB-Serial adapter go from flashing to not flashing when the errors happen.
I had him completely disconnect the USB adapter from the ECU, to see if it was causing the driveability problem, no, the car did not get better.
I don't have a lot of experience with USB adapters, so I need help here.
All I know is this ecu worked on my bench (just power and gnd) and my computer (serial)
I'm waiting on Chris to try a different laptop and adapter.
Any advice or experiences with the USB adapters is greatly appreciated.
Kevin