« previous next »
Pages: [1]

Author Topic: EGT probe to measure inlet air temp?  (Read 4872 times)

Offline Ellisd

  • Jr. Member
  • **
  • Posts: 53
  • BHP: 4
EGT probe to measure inlet air temp?
« on: February 07, 2009, 07:04:08 pm »
As titled, would this work? what's the range of the 6mm EGT probe? I'm wanting to do this as I'm not going to bother removing the manifold to tap it untill i get a new turbo, so was wondering if i could use the sensor to measure inlet temps instead of it sitting gathering dust?
Logged

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: EGT probe to measure inlet air temp?
« Reply #1 on: February 07, 2009, 09:18:09 pm »
It´s going to be slower then a normal MAT sensor
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: EGT probe to measure inlet air temp?
« Reply #2 on: February 07, 2009, 11:27:18 pm »
it measures as low as -50degC to 1200C IIRC
Logged

Offline Ellisd

  • Jr. Member
  • **
  • Posts: 53
  • BHP: 4
Re: EGT probe to measure inlet air temp?
« Reply #3 on: February 08, 2009, 03:05:48 am »
Worth a try me thinks  :D
Logged
Pages: [1]
« previous next »