« previous next »
Pages: [1]

Author Topic: Using Wideband output and EGT output  (Read 6159 times)

Offline mgstu

  • Jr. Member
  • **
  • Posts: 4
  • BHP: 1
Using Wideband output and EGT output
« on: January 06, 2009, 01:45:55 am »
Hi all,

Im currently using the wideband output from my  Vems guage into my managment ECU, id also like to input the EGT as I can get the ECU doing things at set levels etc, but it appears I can have the guage doing a wideband and EGT output at the same time, am i missing something or is this the case. ?

thanks.!
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: Using Wideband output and EGT output
« Reply #1 on: January 06, 2009, 04:15:28 pm »
There is only one analog output so you can only have Lambda or EGT outputs I'm afraid.
Logged
Pages: [1]
« previous next »