I'm trying to work out what i'll need, can anyone tell me what i'll need for a nice set up? If i've got some sort of idea, then I can go to a vems dealer and ask for further advice and purchase a kit without being totally clueless.
It's for a Volvo t6 2.9 from an S80 converted to rwd with a single GT35R sized or bigger turbo, it's mainly for motorsport and fast road. I am completely new to DIY modification and mapping, i've always paid someone to do anything above intermediate skill level stuff for me in the past.
These are the people I am thinking about going with:
www.doyouneedabrain.co.uk VEMS v3.3 controller (ECU) From £390.00
Options:
Knock input & 1 channel EGT input £ 22.50
2nd EGT input (special option) POA
Audi trigger (155-1 tooth) £ 9.50
Wideband and EGT Gauge Prices
Wideband and EGT Gauge (52mm) with Bosch LSU4 sensor and loom. £195.00
Sensor Prices
LSU4 Wideband oxygen sensor £ 63.00
Oxygen sensor weld-in mounting boss £ 3.00
400/250kPa Pressure Sensor £ 35.00
2mm N/A EGT sensor (inc. compression gland & connectors) £ 49.00
6mm to 2mm Turbo EGT sensor (inc. compression gland & connectors) £ 52.50
Coolant Temp sensor (inc. loom connector) £ 19.00
Mass Air Temp Sensor (inc. loom connector) £ 19.00
Bosch Knock Sensor (inc. loom connector) £ 37.00
Loom Pricing
Econoseal18 with crimped 2m wires £ 27.50
Econoseal36 with crimped 2m wires £ 39.00
Wideband connector with crimped 2m wires £ 10.00
Econoseal18-Wire (self crimp) £ 8.00
EconoSeal36-Wire (self crimp) £ 11.00
Wideband connector (self crimp) £ 5.00
2pin Junior timer (injector plug) £ 3.00
3pin Sensor connector £ 4.50
Displays
LCD display 20x4 (Green with a 76x25mm viewing area) £ 23.00
LCD display 20x4 (Blue with a 76x25mm viewing area) £ 32.00
LCD display 20x4 (blue with a larger viewing area) £ POA
Other parts
Data-logging daughter board, uses an SD card (up to 4GB) £TBA
Boost Control Solenoid (OE VAG/FORD) £31.50
Stackable Relay Base £3.00
Stackable Fuse Holder £2.00