Author Topic: When Cranking , crank state remains off, RPM 0. Triggers seem to work.  (Read 3712 times)

Offline rico_pl

  • New Users
  • *
  • Posts: 1
  • BHP: 0
Hi, I have an Escort Cosworth with a custom wiring loom. (no documentation....)
I created a trigger file and I see signals. But the cranking state remains off ?

Trigger is set to "Lancia_cosworth".
What could cause this ? Weak signal ? Alarm system ?

VT 1.5.55
Firmware 1.2.11

Thanks a lot for any hints. How to upload files ?
Rico

Offline jrussell

  • VEMS USA
  • Administrator
  • Full Member
  • *****
  • Posts: 224
  • BHP: 15
    • VEMS USA
Re: When Cranking , crank state remains off, RPM 0. Triggers seem to work.
« Reply #1 on: August 23, 2018, 05:49:50 pm »
Probably wrong trigger settings if you're getting proper signals from trigger file.

To share config/logs/triggerlogs the easiest way is to use the help menu on VemsTune and submit a sharing center report. Then paste the URL here.
VEMS USA - Located in beautiful Burlington, Vermont
1988 RX7 Turbo