News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Vems eaw 52 keeps rebooting but won’t read

Started by Big simer, July 30, 2018, 10:26:20 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Big simer

July 30, 2018, 10:26:20 PM
Hey got a vems afr egt gauge . Took about 6 months to install . So I ran both bungs for afr n egt. Wired everything up started the car n I can see the egt go up (so I’m excited) the for the afr I get a H that counts up n makes it up to 22 then restarts n restarts etc... what do u think.

Kamuto

#1
July 31, 2018, 12:52:32 AM
Quote from: Big simer on July 30, 2018, 10:26:20 PM
Hey got a vems afr egt gauge . Took about 6 months to install . So I ran both bungs for afr n egt. Wired everything up started the car n I can see the egt go up (so I’m excited) the for the afr I get a H that counts up n makes it up to 22 then restarts n restarts etc... what do u think.

probably you have mixed wires in lambda connector, as i know it comes with wires separated from connector?
Vems installer in Lithuania
[email protected]
Print
Go Up Pages1
User actions